Ferrari 348 TB Recalls
Vehicle manufacturers issue official Ferrari 348 TB recall notices to inform car owners of problems and/or defects that have been brought to the manufacturer's attention. An automotive recall requires the manufacturer to send an official notice to owners of the vehicles found to be defective once the NHTSA deems the problem to be wide spread and an official Ferrari 348 TB recall. View listings of Ferrari 348 TB recalls from NHTSA below with full details, vehicles affected, date reported, and more.
|
|
 |
Used 1994 Ferrari 348 TB Recalls
Components: SEAT BELTS
Cars Affected: 556
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AUTOMATIC SEAT BELT SLIDER CAN BECOME JAMMED WHEN THE SLIDER TAPE SEPARATES FROM THE TAKE-UP REEL, ILLUMINATING THE SEAT BELT WARNING LIGHT. SHOULD SUCH A CONDITION OCCUR, THE BELT MUST BE POSITIONED AND FASTENED MANUALLY BY CONNECTING THE BELT TO THE FIXED ANCHOR POINT.
Consequences:
THE OCCUPANT MAY NOT REALIZE THAT THE SEAT BELT CAN BE OPERATED MANUALLY, AND DOES NOT USE THE RESTRAINT SYSTEM, INCREASING THE RISK OF PERSONAL INJURY IN THE EVENT OF A VEHICLE CRASH.
Remedy:
DEALERS WILL REPLACE THE COMPLETE PASSIVE RESTRAINT SEAT BELT SYSTEM.
|
|
|
Used 1991 Ferrari 348 TB Recalls
Components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Cars Affected: 182
Summary:
THE STEERING BOX EXTENSION FASTENERS WERE MANUFACTURED WITH INFERIOR MATERIAL.
Consequences:
THE FASTENER CAN LOOSEN, CAUSING PLAY IN THE STEERINGSYSTEM AND IMPAIRED HANDLING.
Remedy:
REPLACE STEERING BOX EXTENSION FASTENER WITH A NEW FASTENER CONSTRUCTED WITH IMPROVED STRENGTH AND SELF-LOCKING PROPERTIES.
Components: STEERING:WHEEL AND HANDLE BAR
Cars Affected: 645
Summary:
THE UPPER STEERING COLUMN LOCKNUT WAS MANUFACTURED WITH INFERIOR MATERIALS AND INFERIOR SELF-LOCKING PROPERTIES.
Consequences:
THE LOCKNUT CAN LOOSEN, CAUSING EXCESSIVE PLAY IN THESTEERING SYSTEM AND IMPAIRED HANDLING. THIS COULD RESULT IN LOSS OF VEHICLECONTROL AND AN ACCIDENT.
Remedy:
REPLACE LOCKNUT WITH AN IMPROVED LOCKNUT.
|
|
|
Used 1990 Ferrari 348 TB Recalls
Components: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
Cars Affected: 812
Summary:
THE ALUMINUM FUEL LINE FITTINGS ON CERTAIN FUEL INJECTION LINES CORRODE, CAUSING THE FUEL LINE FITTINGS TO BREAK.
Consequences:
THE BREAKAGE OF THE FUEL LINE FITTING CAUSES FUELLEAKAGE, RESULTING IN INCREASED RISK OF FIRE IN THE PRESENCE OF A SOURCE OFIGNITION.
Remedy:
REPLACE THE FUEL LINES WITH MODIFIED LINES CONSTRUCTED WITH A CORROSION RESISTANT COATING TO PREVENT FUEL LINE SURFACE CORROSION.
Components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Cars Affected: 182
Summary:
THE STEERING BOX EXTENSION FASTENERS WERE MANUFACTURED WITH INFERIOR MATERIAL.
Consequences:
THE FASTENER CAN LOOSEN, CAUSING PLAY IN THE STEERINGSYSTEM AND IMPAIRED HANDLING.
Remedy:
REPLACE STEERING BOX EXTENSION FASTENER WITH A NEW FASTENER CONSTRUCTED WITH IMPROVED STRENGTH AND SELF-LOCKING PROPERTIES.
Components: STEERING:WHEEL AND HANDLE BAR
Cars Affected: 645
Summary:
THE UPPER STEERING COLUMN LOCKNUT WAS MANUFACTURED WITH INFERIOR MATERIALS AND INFERIOR SELF-LOCKING PROPERTIES.
Consequences:
THE LOCKNUT CAN LOOSEN, CAUSING EXCESSIVE PLAY IN THESTEERING SYSTEM AND IMPAIRED HANDLING. THIS COULD RESULT IN LOSS OF VEHICLECONTROL AND AN ACCIDENT.
Remedy:
REPLACE LOCKNUT WITH AN IMPROVED LOCKNUT.
|
|
|
|
